The experimental results of an air-core pulse transformer are presented, which is very compact (<10 Kg in weight) and is primed by a capacitor bank that is fabricated in such a way that the capacitor bank with its switch takes the shape of single-turn rectangular shaped primary of the transformer. A high voltage capacitor assembly (pulse-forming-line capacitor, PFL) of 5.1 nF is connected with the secondary of transformer. The transformer output voltage is 160 kV in its second peak appearing in less than 2 μS from the beginning of the capacitor discharge. The primary capacitor bank can be charged up to a maximum of 18 kV, with the voltage delivery of 360 kV in similar capacitive loads. 相似文献
High-quality zinc oxide (ZnO) nanowires were synthesized using the atmospheric chemical vapor deposition technique and were appropriately characterized. Subsequently, the nanowire surface was covalently grafted with 1-pyrenebutyric acid (PBA) fluorophore, and surface-sensitive X-ray photoelectron spectroscopy and Fourier transform infrared-attenuated total reflectance spectroscopy were utilized to confirm the functionalization of 1-pyrenebutyric acid on the nanowire surface. Additionally, photoluminescence (PL) measurements were used to evaluate the optical behavior of pristine nanowires. Through fluorescence quenching of 1-pyrenebutyric acid by p-nitrophenol, a detection limit of 28 ppb was estimated. Based on these findings, ZnO nanowires functionalized with 1-pyrenebutyric acid are envisaged as extremely sensitive platforms for the ultra-trace detection of p-nitrophenol in biological systems. 相似文献
4-C-Alkyl/aryl-S-ribosylhomocysteine (SRH) analogues were prepared by coupling of homocysteine with 4-substituted ribofuranose derivatives. The diastereoselective incorporation of the methyl substituent into the 4 position of the ribose ring was accomplished by the addition of methylmagnesium bromide to the protected ribitol-4-ulose yielding the 4-C-methylribitol in 85% yield as single 4R diastereomer. The 4-C hexyl, octyl, vinyl, and aryl ribitols were prepared analogously. Chelation controlled addition of a carbanion to ketones from the Si-face was responsible for the observed stereochemical outcome. Oxidation of the primary alcohol of the 4-C ribitols with catalytic amounts of tetrapropylammonium perruthenate in the presence of N-methylmorpholine N-oxide produced 4-C-alkylribono-1,4-lactones in high yields. Mesylation of the latter compounds at the 5-hydroxyl position and treatment with a protected homocysteine thiolate afforded protected 4-C-alkyl/aryl-SRH analogues as the lactones. Reduction with lithium triethylborohydride and successive global deprotections with TFA afforded 4-C-alkyl/aryl SRH analogues. These analogues might impede the S-ribosylhomocysteinase(LuxS)-catalyzed reaction by preventing β-elimination of a homocysteine molecule, and thus depleting the production of quorum sensing signaling molecule AI-2. 相似文献
Presently, there are numerous applications for non-destructive techniques like emission tomography, laser based methods and particle image velocimetry that are used to study flame characteristics. Reconstruction of the flame intensity field using emission tomography has the advantage over other technologies that it gives accurate results but at the same time requires relatively inexpensive equipment, and therefore, has numerous industrial applications. In the present paper, a new algorithm performing Direct-3D reconstruction using the maximization of entropy (MENT) methodology has been introduced. Through detailed studies using a mathematical object, it has been shown that the Direct-3D algorithm shows significantly reduced errors as compared to 2D slice-by-slice reconstruction algorithms. Secondly, the major features of the proposed algorithm, for e.g., effect of orientation, effect of number of views, and robustness have been discussed. Finally, a few qualitative results from actual flames have been presented using a candle and a gas fired burner, and the results match well with the actual flame geometry and intensity distribution. 相似文献
Objective: Innovation in material science has made it possible to fabricate a pharmaceutical material of modifiable characteristics and utility, in delivering therapeutics at a sustained/controlled rate. The objective of this study is to design and optimize the controlled release transdermal films of S-Amlodipine besylate by intercalating hydrophilic and hydrophobic polymers.
Methods: 3(2) factorial design and response surface methodology was utilized to prepare formulations by intercalating the varied concentration of polymers(A) and penetration enhancer(B) in solvent. The effect of these independent factors on drug release and flux was investigated to substantiate the ex-vivo, stability and histological findings of the study.
Results: FTIR, DSC revealed the compatibility of drug with polymers; however, the semicrystallinity in drug was observed under PXRD. SEM micrographs showed homogeneous dispersion and entanglement of drug throughout the matrix. Results from the permeation study suggested the significant effect of factors on the ex vivo permeation of drug. It was observed that drug release was found to be increased with an increase in hydrophilic polymer concentration and PE. The formulations having polymers (EC:PVPK-30) at 7:3 showed maximum drug release with highest flux (102.60?±?1.12?µg/cm2/h) and permeability coefficient (32.78?±?1.38?cm/h). Significant effect of PE on lipid and protein framework of the skin was also observed which is responsible for increased permeation. The optimized formulation was found to be stable and showed no-sign of localized reactions, indicating safety and compatibility with the skin.
Conclusion: Thus, results indicated that the prepared intercalated transdermal matrix can be a promising nonoral carrier to deliver effective amounts of drug. 相似文献
Measurement of bed shear stress is always a challenging task for engineers. In river engineering, bed shear is a fundamental variable and is important in estimating flow resistance and sediment transport. In this study, experiments are carried out in diverging compound channel with smooth bed (perspex sheet) and rough bed (Gravel) conditions to determine the effect of roughness. The shear velocity is estimated from universal logarithmic law. The effect of geometry and roughness on Von-Karman constant, eddy viscosity coefficient, friction factor is studied. The mass conservation and momentum conservation equations are used to derive apparent shear forces at interface of main channel and floodplain. A genetic algorithm model is developed to predict percentage of shear force (%Sfp) carried by sub-sections. To perform better with less and unseen data K-Fold cross-validation technique is used. The model is compared with available models in literature and it is observed that developed model gave better predictions with low MAPE.
We report investigations on polycrystalline LaCo1?xAlxO3 (x = 0–0.9) bulk samples. The solid state synthesized samples showed a coexistence of rhombohedral and monoclinic phases in the intermediate concentrations (0.2 ≤ x ≤ 0.5) and pure rhombohedral phase otherwise. The observed effect of Al doping on dc transport has been analysed on the basis of small polaron hopping mechanism. The magnetisation results presented give evidence of weak ferromagnetism and anomalous temperature dependence of coercivity which we associate to the canting of the localised high-spin Co(III) and anti-symmetric exchange interactions at low temperatures. 相似文献
The low temperature operability and oxidative stability of cottonseed oil methyl esters (CSME) were improved with four anti‐gel additives as well as one antioxidant additive, gossypol. Low temperature operability and oxidative stability of CSME was determined by cloud point (CP), pour point (PP), cold filter plugging point (CFPP), and oxidative stability index (OSI). The most significant reductions in CP, PP, and CFPP in all cases were obtained with Technol®, with the average reduction in temperature found to be 3.9 °C. Gunk®, Heet®, and Howe's® were progressively less effective, as indicated by average reductions in temperature of 3.4, 3.0, and 2.8 °C, respectively. In all cases, the magnitude of CFPP reduction was greater than for PP and especially CP. Addition of gossypol, a polyphenolic aldehyde, resulted in linear improvement in OSI (R2 = 0.9804). The OSI of CSME increased from 5.0 to 8.3 h with gossypol at a concentration of 1000 ppm. 相似文献